１．Cut the fleece fabric with 3cm seam allowance at the cap edge.
２
４．
Place the pattern on the sweater, align at the rib and pin together.
Cut two pieces from body front and back.
４
→
３
→
１．Print a pattern from my HP at same size on two A4 paper sheets.
Cut them out, turn over one pattern and place them symmetrically. Tape
together.
８．Pin another dart and sew it.
７．Sew the seam using an overlock stitch or a narrow zig-zag width and length or a straight stitch with an elastic thread.
7
２．Poke a little hole at end of every darts on pattern sheet.
12
２
１
→
９．Sew another part in the same way.
Lay two fabrics together right side in, pin at the seam allowances.
→
６
→
５
５．Mark points of end of darts with basting yarn.
３．Cut the seam allowances carefully.
３
→
２．Fold the seam allowance and zigzag stitch at the edge.
Finish!
→
→
１．Lay a pattern 9cm above from hemline, pin together.
Cut two pieces from body front and back.
→
12．Turn to right. Finish!
９
６．Fold a dart. Pin them to match the lines. Sew the seam allowance.
１
11．Sew a hole of top of the cap with a needle and thread.
→
８
２．Sew it in the same way.
10
